CNC Heads Sports/Saloon Championship

Class A Winner and Champion 2018 - Paul Rose Class B Winner 2018 - Luke Armiger Class C Winner 2018 - Dave Harvey Class D Winner 2018 - Garry Wardle Class E Winner 2018 - Jamie Cryer Class F Winner 2018 - Clive Dix

About the CNC Heads Championship

This Sports/Saloon championship started off back in 1984 as a Special GT championship with a small core of regular enthusiastic entrants. Over the next 30 years it has grown into a successful, stable and cost-effective Sports/Saloon championship over 12 rounds with grids regularly exceeding 30 cars of varied make, model and power.

Championship sponsor CNC Heads is welcomed back for another year, their twelfth. Without their enthusiastic support the Championship would not be as strong as it currently is. To be eligible cars must have been originally designed for road use, they are then split into two basic categories, Special and Modified. Each of these categories is then sub-divided into three capacity classes with splits at 1600cc and 2500cc. The more highly modified cars fit into the Special classes, basically as long as the car has the same silhouette as the original then it will probably be suitable. The Modified classes are for the less tuned cars and does also include virtually road going cars.

Latest News

Registrations are now open for the 2019 season, our 36th year! If you have not received documentation please contact John Leck on e-mail and a set will be sent out. Alternatively the documentation is further down this page - please read all documentation.

Race Meeting Documentation and Information

Regulations for the 2019 season are available and can be found below.

2019 Calendar - CNC Heads Sports/Saloon Championship

2019 Standings - CNC Heads Sports/Saloon Championship

2017 Final Points Positions


2018 Final Points Positions


2019 Reports - CNC Heads Sports/Saloon Championship

Timing Files Courtesy of TSL Timing Solutions Ltd.


Round 1 - Oulton Park - 17th March 18 - Race Report


Round 1 - Oulton Park - 17th March 18 - TSL Timings


Rounds - 2 & 3 - Cadwell - 14/15th April 18 - Race Report


Rounds - 2 & 3 - Cadwell - 14/15th April 18 - TSL Timings


Rounds - 4, 5 & 6 - Anglesey - 26/27th May 18 - Race Report


Rounds - 4, 5 & 6 - Anglesey - 26/27th May 18 - TSL Timings


Round 7 - Oulton Park - 23rd June 18 - Race Report


Round 7 - Oulton Park - 23rd June 18 - TSL Timings


Rounds 8, 9 & 10 - Anglesey - 1st/2nd Sept - Race Report


Rounds 8, 9 & 10 - Anglesey - 1st/2nd Sept - TSL Timings


Rounds 11 & 12 - Donington - 29th Sept - Race Report


Rounds 11 & 12 - Donington - 29th Sept - TSL Timings


Rounds 13 & 14 - Oulton Park - 20th Sept - Race Report


Rounds 13 & 14 - Oulton Park - 20th Sept - TSL Timings


Championship Review


Latest News - CNC Heads Sports/Saloon Championship

Paul Rose, Paul Woolfitt & Team Cryer take top awards at the Real Night Out

Another Successful CNC Heads season was celebrated at the Real Night Out last Saturday. All the class and overall awards were presented by Sponsor Ric Wood who continues his sponsorship for a twelfth season in 2019. Special awards on the night included Driver of the Year to Paul Woolfitt and the Spirit of the Championship to Team Cryer.

Registrations open for 2019 CNC Heads Championship

Registrations are now open for the 2019 CNC Heads Sports/Saloon Championship - the 36th running of this most popular, friendly and successful club racing championship. Documentation is available on this site on the CNC Heads page or follow the link below. See you on the grid on the 23rd March!

Paul Rose takes second title with two wins at Final Oulton

Paul Rose was crowned CNC Heads Champion for the second time after two wins at the final round. Going into the last event he held a slight advantage over Jamie Cryer but a comfortable victory from the back of the grid ensured he took the title. On the way he 'smashed' the lap record for the class by 8 thousand's! Jamie Cryer took Class E overall with the other classes falling to Luke Armiger (Class B), Dave Harvey (Class C), Garry Wardle (Class D) and Clive Dix (Class F).

Bird and Rose share the spoils at Donington

Danny Bird and Paul Rose each took an overall win away from Donington Park at the penultimate race meeting of the year. Rose still leads the championship overall going into the double header at Oulton Park on the 20th October but Jamie Cryer who took maximum points from Donington is now within striking distance of stealing the championship from Rose. Danny Bird was over the moon with his overall win as was newcomer Dominic Jackson in his Class A Saker.

Second Anglesey Triple for Paul Rose

For the second time this year Paul Rose in his Saker took a triple in Anglesey. Even starting from the pit lane in the third race did nothing to dent his mastery of the picturesque circuit. David Harvey (Locosaki) and Garry Wardle (Porsche 996) also had triple class wins. Rose now leads the championship comfortably though he can be caught if he has some bad luck. Jamie Cryer, Oliver Thomas, Dave Harvey and Clive Dix are poised to take advantage of any slip ups.

Rose wins from Bird at latest Oulton

The latest round of the CNC Heads Sports/Saloon Championship saw Paul Rose take another dominant win after his team mate, Steve Harris, retired. He was followed home by the Class C Spire of Danny Bird and Luke Armiger's Class B Vauxhall Tigra. The other classes saw much closer racing with class wins for Oliver Thomas (Subaru), Paul Rotheroe (Citroen Xsara) and the Class F Honda Civic of Rob Wakelin.

Paul Rose and Jamie Cryer Take Race Wins at Cadwell

Although circumstances forced the organisers to merge the grids if they hadn't then Paul Rose and Jamie Cryer would have both taken overall wins at Cadwell Park. Full grids resulted in spectacular racing and fun for the crowd. Other class winners were, Paul Dobson, David Harvey (2), Oliver Thomas(2), Robert Wakelin (2) and Tony Ellis.

Full Grid for second and third rounds at Cadwell

This weekend sees the second and third rounds of the CNC Heads Sports/Saloon Championship at Cadwell Park. All the leading competitors from the opening round at Oulton Park are our again at Cadwell. The main question is whether or not Paul Rose will be able to win again or will the more nimble 'Caterfields' have an advantage.

BARC (NW) Welcomes CSP Detailing Systems as new Championship Partner

The North Western Centre takes great pleasure in welcoming CSP Detailing Systems as a new partner with the CNC Heads Sports/Saloon Championship. CSP will be at each of the championship rounds and will be presenting up to three sets of their products to competitors from the championship each meeting. The first recipients were Jamie Cryer, Ian Burrows and Paul Rotheroe.

Rose takes CNC Heads Round 1 at a bitterly cold Oulton Park

It was business as normal at the opening round of the Championship at Oulton Park. Very wintry conditions made it a truely cold day but a great race was put on by all the competitors. Apart from Paul Rose the other class winners were, Jon Woolfitt (Class B), Dave Harvey (Class C), Allan Davies (Class D), Kristian Rose (Class E) and Clive Dix (Class F)

Contact - CNC Heads Sports/Saloon Championship

Championship Co-ordinator

John Leck
Tel: 0151 475 9237
Tel: 07889 760872

Contact John if you have any general queries regarding the Sports/Saloon Championship, registering for it or chasing entries etc. All Driver Registration forms should go to John

Championship Eligibility Scrutineer

Peter Gorrie
Tel: 01253 884580
Tel: 07813 848671

Contact Peter if you have any technical questions regarding the championship or want to check the eligibility of your car. All Vehicle Eligibility forms should go the Peter

Driver Representatives

Duncan Aukland
Tel: 01928 723773
Tel: 07902 739685

Graham Saul
Tel: 07782 348055

Mike Nash
Tel: 07939 511484

Contact any of the Drivers Representatives if you have a comment or concern on the Championship, ideas for making it better or liaison on race day. One of them will usually be in the paddock talking to drivers at each race meeting

Permanent Championship Clerk of the Course

David Williams
Tel: 01606 74205
Tel: 07932 651079

Contact David if you have any questions regarding standard of driving or the operation running of a Championship race.

Forms & Regulations

Championship Regulations 2019


Driver Registration Document 2019


Vehicle Specification Form


Driver Information Document


Joker Round Form


Full Day Car Race Marshalling Form


Decal Request Form


Race Meeting Entry Form


2019 Bulletin No. 1 - Registration Details


2019 Bulletin No. 2 - Race Entry Details